In this report we’re going to examine how to create your own dog mask. We’ll cover the basics and then go on to look at some of the more advanced tips and techniques which you can use.

If you have a dog that likes to bark, and particularly if your dog loves to play in the garden and other areas of the house, you will need to get them some special dog protection.

Paper Plate 3d Dog Mask http://lerecit.llbquebec.ca/?p=40787 DIY Materials: This is the initial part of the set-up which will look a little scary at first, but it’s really very straightforward. All you have to do is take a cardboard cutting board and cut the cardboard into the shape of your mask. You can not just cut a rectangular shape out of the cardboard, so you’ll have to cut around the edge of the mask so that you get something that looks like a cone. The main thing here is to be realistic with what type of paper plate which you’re using.

Then you’ll have to wrap the cardboard around the edges of the paper plate, making sure that there is a good seal between the two pieces so that you can ensure that nothing will leak once you put the mask on. Make sure the edges are cut so the edges aren’t sharp, as this may damage the edges of the mask.

Glue it on! The next step involves using some paint. You ought to spray the paint over the cardboard, making sure that it runs smoothly and evenly across the entire mask. You’ll want to start with one side of the mask first, so you can work your way around it before moving onto the other side. The paint has to be slightly thicker than the cardboard, and it’s best that you leave about one-third of an inch of paint on the edges so that it runs over the cardboard.

Don’t fret too much about the paint getting stuck to your mask. It’s easy to remove it later, and it will leave you with a nice finished mask to show off to everyone! It’s also a good idea to wipe away any excess paint once you are done, so you don’t wind up with smudges or smears on your dog.

Then it’s time to glue the mask on your dog’s head. First you will need to be certain that you get a secure fit between the mask and your dog’s head. As soon as you’ve made sure that it is secure, then you may begin to glue the mask onto the dog’s face. Take the piece of cardboard that is used for the foundation of the mask and then fold it over. Be certain it’s quite strong and then use your hands to secure the cardboard down in place.

Keep your hands out of the way and use tape to hold it in place as you repeat the process on the cardboard folds until you have the mask snugged firmly onto the face of your dog. Do not make the folds too big or else it might look messy. As soon as you’ve completed this, you can then take out the mask and attach the cardboard ears. And attach the other part of the mask on the dog. Be sure the ears are flat and be sure that it is not too short or long as this will cause some issues with the mask slipping off the dog’s face.

If you are using a dog mask because your dog protection, you will need to do some sanding to be certain it is safe on your dog. You can do it by sanding off any excess paper that may have been eliminated from your mask.